Duct Air Coolers (SYC-18 PP)

SYC-18 PP Duct Air Cooler for Industrial and Commercial Cooling

A warehouse or workshop can become uncomfortable long before the outdoor temperature reaches its daily peak. Motors give off heat, fabrication work adds more, and a high roof can trap warm air above the working area. Simply adding another fan may move that hot air without actually cooling it.

The SYC-18 PP Duct Air Cooler offers another approach. It uses evaporative cooling and sends the resulting air into a duct arrangement, so the outlet does not have to sit directly beside the people or equipment that need cooling.

This arrangement can make sense in factories, workshops, warehouses, service areas and other buildings where one cooler needs to feed a planned air-distribution route. Alvina supplies the SYC-18 PP for requirements across UAE, Abu Dhabi, Dubai, Sharjah, Saudi Arabia, Riyadh, Jeddah, Dammam, Qatar, Bahrain, Kuwait and Oman.

What is SYC-18 PP Duct Air Cooler?

The SYC-18 PP belongs to the industrial evaporative cooler range. Instead of relying on a refrigeration circuit, an evaporative cooler brings incoming air into contact with water-moistened cooling media.

As water evaporates, it takes heat from the passing air. A fan then moves that air towards the outlet and into the connected ductwork. From there, the duct layout determines where the airflow reaches the building.

That distinction matters. A portable cooler normally blows from the machine directly towards a nearby zone. A Duct Air Cooler, on the other hand, can form part of a planned ventilation layout. Installers can route the air towards workstations, production sections or other areas according to the site design.

Evaporative cooling also introduces outside air rather than continually recirculating the same indoor air. For this reason, adequate exhaust and ventilation form an important part of a successful installation.

Key Features of SYC-18 PP Duct Air Cooler

• Duct-Based Air Distribution: Allows cooled air to reach selected areas through connected duct outlets.
• Evaporative Cooling Technology: Uses water evaporation to reduce air temperature naturally.
• Axial Fan Operation: Provides strong airflow movement for industrial applications.
• Compact Industrial Design: Suitable for locations with limited installation space.
• Flexible Installation: Can be integrated into different duct layouts.
• Energy Efficient Cooling: Uses less power compared with traditional refrigeration cooling systems.
• Industrial Application Support: Works well in factories, workshops and commercial areas.
• Continuous Air Circulation: Helps maintain better airflow in large indoor spaces.

Uses of SYC-18 PP Duct Air Cooler

• Factories: Used for cooling production and assembly areas.
• Warehouses: Helps improve air movement in storage facilities.
• Workshops: Provides airflow around repair and fabrication sections.
• Manufacturing Units: Supports cooling near heat-generating operations.
• Commercial Spaces: Used for large halls and open areas.
• Industrial Sheds: Helps reduce heat buildup in enclosed structures.
• Service Centres: Improves working comfort for technicians.
• Loading Areas: Supports airflow in semi-open working zones.

Applications Across UAE and GCC

Industrial cooling requirements are high across GCC countries due to hot weather conditions and large working environments.

• Dubai: Warehouses and industrial facilities use Industrial Duct Air Cooler systems for improving airflow in large spaces.
• Abu Dhabi: Manufacturing and service facilities use cooling solutions for production areas and workshops.
• Sharjah: Industrial units use evaporative cooling systems for economical temperature control.
• Saudi Arabia: Facilities in Riyadh, Jeddah and Dammam use duct cooling solutions for factories, warehouses and workshops.
• Riyadh: Large industrial buildings use High Airflow Duct Cooler systems where wider air distribution is required.
• Jeddah: Workshops and commercial facilities use cooling equipment for better workplace conditions.
• Dammam: Industrial plants use Axial Fan Duct Air Cooler systems around operational areas.
• Qatar, Bahrain, Kuwait and Oman: Industrial and commercial facilities use duct cooling systems for large indoor applications.

Technical Specification

How Does a Duct Air Cooler Work?

A duct air cooling system combines water cooling and air movement. Warm air enters the cooler and passes through wet cooling media. The evaporation process removes heat from the air. The axial fan then pushes the cooled air through ducts connected to different sections of the building.

This method works best in areas with proper ventilation because fresh air circulation improves cooling performance.

Certifications, Standards and Compliance

• ISO 9001 – Quality Management System
• IEC 60335 – Safety of Electrical Appliances
• CE Marking Requirements
• RoHS Compliance

Why Choose SYC-18 PP Duct Air Cooler from Alvina?

• Suitable for industrial and commercial cooling requirements.
• Provides duct-based air distribution.
• Uses evaporative cooling technology.
• Supports large-area airflow applications.
• Suitable for factories, warehouses and workshops.
• Available for UAE and GCC industrial requirements.
• Supplied by Alvina for cooling applications.

Frequently Asked Questions

1. What is SYC-18 PP Duct Air Cooler?
It is an evaporative cooling unit that distributes cooled air through duct connections.

2. Where can this cooler be used?
It can be used in factories, warehouses, workshops and commercial buildings.

3. What cooling technology does this model use?
The unit uses water-based evaporative cooling technology.

4. Does this model support duct installation?
Yes, it is designed for duct air distribution systems.

5. What type of fan is used in this cooler?
The system uses an axial fan for air movement.

6. Is it suitable for GCC climate conditions?
Yes, evaporative cooling systems are commonly used in suitable ventilated areas across GCC regions.

7. Where does Alvina supply this product?
Alvina supplies cooling solutions across UAE, Saudi Arabia, Qatar, Bahrain, Kuwait and Oman.

Conclusion

The SYC-18 PP Duct Air Cooler provides a practical cooling option for industrial and commercial spaces that require distributed airflow.

Its duct-based design, evaporative cooling method and axial fan operation make it suitable for factories, warehouses, workshops and large working areas.

Alvina supplies SYC-18 PP Duct Air Cooler solutions across the UAE and GCC for industrial cooling requirements.