ElectriCorr VpCI-286
Corrosion Protection Coating for Electronics in UAE by Alvina protects circuit boards, PCB assemblies and electrical parts from moisture.
Corrosion Protection Coating | ElectriCorr VpCI-286 Supplier
ElectriCorr VpCI-286 is a Corrosion Protection Coating for Electronics used to protect circuit boards, PCB assemblies and electronic components from moisture, corrosion, dust, fungus and harsh storage conditions. It is an acrylic conformal coating that creates a thin protective barrier around the board and its components. Also, it uses VpCI technology to help reduce corrosion on metal surfaces. The coating is suitable for new and repaired electronic assemblies, especially in areas with humidity, heat and salt air. Alvina supplies ElectriCorr VpCI-286 across the UAE, including Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. In addition, Alvina supports customers in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain. This product suits electronics repair, PCB manufacturing, control systems, marine electronics, industrial panels and maintenance work.
Corrosion Protection Coating for Electronics in UAE – ElectriCorr VpCI-286
ElectriCorr VpCI-286 is a Corrosion Protection Coating for Electronics made for PCB assemblies, circuit boards and sensitive electronic parts. In the UAE and GCC, electronics often face heat, humidity, salt air, dust and industrial pollution. Because of this, printed circuit boards and electrical assemblies can slowly lose reliability. Moisture can also create corrosion on metal tracks, soldered areas, connectors and component legs.
This product helps reduce these issues by forming a thin conformal coating over the surface. It protects the board from moisture, dust, fungus and contamination. Moreover, the VpCI technology inside the coating helps fight corrosion on metal areas. Official product information describes ElectriCorr VpCI-286 as an acrylic conformal coating made to extend the long-life performance of new and repaired electronic assemblies, especially under high heat and humidity conditions.
What is ElectriCorr VpCI-286?
ElectriCorr VpCI-286 is an acrylic-based conformal coating for electronics. A conformal coating is a thin protective layer applied over a circuit board. It follows the shape of the board and protects components without creating a thick cover.
This product works as an Electronic Corrosion Protection Coating and a VpCI Protective Coating for Electronics. It creates a sealed microenvironment around the circuit board and its parts. As a result, it helps protect printed circuit assemblies from moisture, dust, fungus, surface corrosion and other contaminants. It also contains a UV indicator, so users can check the applied coating under UV light.
Key Features of Corrosion Protection Coating for Electronics
- Works as a Corrosion Protection Coating for Electronics and PCB assemblies.
- Helps protect circuit boards from moisture, dust, fungus and contamination.
- Uses VpCI technology for added corrosion protection.
- Forms a thin acrylic conformal coating on the board surface.
- Helps protect against humidity and salt-air corrosion.
- Suitable for new and repaired electronic assemblies.
- Provides low conductivity, which makes it suitable for sensitive electronics.
- Fast drying and easy to apply as an aerosol spray.
- Contains a UV indicator for checking coating coverage.
- Works as a single-component coating, so it does not need mixing equipment.
- Can be removed with suitable solvents when repair work is needed.
- Helps improve reliability in high-humidity and high-heat areas.
Applications Across UAE and GCC
In the UAE, ElectriCorr VpCI-286 is useful for PCB repair shops, electronics maintenance teams, automation companies, marine service providers, panel builders, oil and gas facilities and industrial plants. Alvina supplies this product across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain.
In Saudi Arabia, it supports electronics and maintenance needs in Riyadh, Dammam, Jubail, Jeddah and Al Khobar. Many industrial and coastal areas need better Circuit Board Corrosion Protection because heat, humidity and dust can affect sensitive boards. In Qatar, it is suitable for marine electronics, facility maintenance and oilfield control equipment. In Oman, it supports ports, workshops, power-related equipment and coastal facilities. Meanwhile, customers in Kuwait and Bahrain can use it for control boards, electrical panels, repair departments and spare PCB storage.
Common Uses of ElectriCorr VpCI-286
- Used on printed circuit boards for moisture and corrosion protection.
- Applied to new electronic assemblies before installation or storage.
- Used on repaired boards after service work.
- Helps protect marine electronics exposed to salt air.
- Supports industrial control boards in dusty and humid locations.
- Used for PCB Corrosion Protection Coating in maintenance work.
- Helps protect boards stored as spare parts.
- Useful for electronics exposed to heat, humidity and contamination.
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | ElectriCorr VpCI-286 |
| Product Type | Acrylic Conformal Coating / Corrosion Protection Coating for Electronics |
| Main Technology | VpCI corrosion inhibitor technology |
| Main Use | PCB and electronic assembly protection |
| Suitable For | Circuit boards, electronic assemblies, repaired boards and PCB components |
| Coating Type | Acrylic-based conformal coating |
| Conductivity | Low / non-conductive coating for electronics |
| Application Form | Aerosol spray or bulk format, depending on supply |
| Dry to Touch | 5 to 10 minutes |
| Dry Film Time | 24 hours |
| Coverage | 6–8 m²/L at 25 microns |
| Carrier | t-butyl acetate |
| Non-Volatile Content | 14%–17% |
| VOC | 0 lbs/gal / 0 kg/L |
| Density | 7.3–7.5 lbs/gal / 0.87–0.9 kg/L |
| Removal Method | Acetone or MEK |
| Shelf Life | 1 to 2 years |
| Supply Area | UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain |
The dry time, coverage, VOC, density, removal method and shelf-life details are listed in the product data sheet for ElectriCorr VpCI-286.
Certifications, Standards and Compliance
For ElectriCorr VpCI-286, customers should request the latest TDS, SDS and compliance documents before purchase. This helps with approval for electronics, marine, oil and gas, industrial, export and maintenance projects.
SDS – Safety Data Sheet
GHS – Globally Harmonized System
REACH Regulation
RoHS Directive
USDA Bio Preferred Program
Why Choose ElectriCorr VpCI-286 from Alvina?
Choose ElectriCorr VpCI-286 when you need a practical Corrosion Protection Coating for Electronics for PCB assemblies and circuit boards. Electronic damage does not always happen suddenly. Sometimes, moisture slowly affects the board, and the issue appears later as signal failure, weak connection or board malfunction. Therefore, a protective coating can reduce risk before damage becomes costly.
Alvina supplies ElectriCorr VpCI-286 across UAE for electronics repair, PCB protection, industrial control systems, marine electronics and maintenance applications. Also, Alvina supports customers in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain. For companies looking for Electronics Anti Corrosion Coating, PCB Corrosion Protection Coating, Electrical Component Protective Coating, or Anti Corrosion Coating for Circuit Boards, this product is a strong choice.
Frequently Asked Questions
1.What is ElectriCorr VpCI-286 used for?
It protects circuit boards and electronic assemblies from moisture, corrosion, dust and contamination.
2.Is ElectriCorr VpCI-286 a conformal coating?
Yes, it is an acrylic conformal coating for PCB and electronic assembly protection.
3.Can it be used on repaired circuit boards?
Yes, it can be used on new and repaired electronic assemblies.
4.Does it help against humidity?
Yes, it helps protect electronics in humid, hot and salt-air conditions.
5.Does it have a UV indicator?
Yes, it contains a UV indicator to help check coating coverage.
6.Can the coating be removed?
Yes, users can remove it with suitable solvents such as acetone or MEK.
7.Where does Alvina supply ElectriCorr VpCI-286?
Alvina supplies it across UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.
Conclusion
ElectriCorr VpCI-286 is a useful Corrosion Protection Coating for Electronics for companies that need reliable PCB and electronic assembly protection. It helps protect circuit boards from moisture, corrosion, dust, fungus and contamination. Also, it supports better board life in hot, humid, coastal and industrial environments.
The product works well for new boards, repaired boards, spare PCB storage, marine electronics and industrial control systems. Alvina supplies ElectriCorr VpCI-286 across the UAE and also supports customers in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain. For businesses looking for Electronic Corrosion Protection Coating, VpCI Coating for Electrical Parts, or Protective Coating for Electrical Components, ElectriCorr VpCI-286 gives a clean and practical protection option.
Woman fashion dress
Price : $387But I must explain to you how all this mistaken idedenounc pleasure and praisi pain was born and I will give you a complete accosystem, and expound the actu teachings of the great explore tmaster-builder of human happiness. No one rejects, dislikes, or avoids.