M-370 Water-Based Additive
Buy M-370 Multimetal Water-Based Corrosion Inhibitor for cleaners, coolants, coatings and metalworking fluids, supplied across UAE and GCC by Alvina.
Multimetal Water-Based Corrosion Inhibitor | M-370 Supplier
M-370 Water-Based Additive is a versatile Multimetal Water-Based Corrosion Inhibitor developed for compatible metalworking fluids, lubricants, industrial cleaners and water-based coatings. It uses Vapor Corrosion Inhibitor technology to support metal protection during manufacturing, processing, cleaning and regular operation. Manufacturers can incorporate M-370 into coolants, primer coatings, alkaline cleaners, detergents and other aqueous industrial formulations. Its recommended addition range of 1% to 10% gives formulators room to adjust the concentration according to the base product and required corrosion performance. M-370 is available in 5-gallon containers, 55-gallon drums, liquid totes and bulk quantities. Alvina supplies M-370 across Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah and Umm Al Quwain, with regional delivery available throughout Saudi Arabia, Qatar, Oman, Kuwait and Bahrain for manufacturers, fabricators, chemical formulators and industrial maintenance companies.
M-370 Multimetal Water-Based Corrosion Inhibitor in UAE
Multimetal Water-Based Corrosion Inhibitor plays an important role in industrial cleaning, machining, cooling, and coating processes. It simplifies production, improves efficiency, and reduces the need for heavy solvent-based products. However, continuous exposure to water can quickly trigger corrosion on metal surfaces if manufacturers do not use proper protection.
M-370 Water-Based Additive helps manufacturers prevent this problem by providing reliable corrosion protection in water-based formulations. Manufacturers blend this Multimetal Water-Based Corrosion Inhibitor directly into products such as metalworking fluids, lubricants, industrial cleaners, and protective coatings during production.
The additive uses Vapor Corrosion Inhibitor (VCI) technology to protect metal surfaces in direct contact with the treated liquid while also shielding enclosed spaces where moisture and condensation may accumulate. Because of this dual-action protection, many manufacturers use M-370 in coolants, primer coatings, alkaline cleaners, detergents, and other water-based industrial products.
Most formulations require only 1% to 10% of M-370, allowing manufacturers to adjust the dosage according to product performance, operating conditions, and corrosion protection requirements.
Alvina supplies M-370 Water-Based Additive throughout the UAE, including Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, and Umm Al Quwain. The product is also available across Saudi Arabia, Qatar, Oman, Kuwait, and Bahrain.
What is M-370 Water-Based Additive?
M-370 Water-Based Additive is a liquid corrosion inhibitor developed for water-based industrial formulations that require dependable multimetal protection. Instead of applying a separate protective treatment after production, manufacturers mix the additive directly into the formulation during the manufacturing process.
After blending, the additive becomes an integral part of the finished product and continuously protects metal components during production, storage, transportation, and daily operation. This approach helps manufacturers reduce corrosion in systems where water-based fluids regularly contact metal surfaces.
M-370 protects a wide range of metal combinations, making it suitable for applications that contain more than one type of metal. In addition, its VCI technology creates a protective environment around exposed metal surfaces, helping protect areas that direct liquid contact may not fully reach.
Key Features of Multimetal Water-Based Corrosion Inhibitor
- Water-based corrosion inhibitor additive
- Suitable for multimetal applications
- Uses VCI corrosion protection technology
- Compatible with water-based lubricants
- Applicable in industrial cleaners and detergents
- Suitable for coolant systems
- Helps protect metal during manufacturing processes
- Recommended usage range: 1% to 10%
- Available in pails, drums, totes, and bulk supply
- Suitable for industrial-scale production
- Supplied across UAE and GCC by Alvina
Uses of Multimetal Water-Based Corrosion Inhibitor
1.Water-Based Metalworking Fluids-Used in machining and forming operations, these fluids benefit from added corrosion protection to help maintain both equipment and finished parts.
2.Industrial Coolants-Coolants circulate around metal components continuously. Adding an inhibitor helps reduce corrosion during operation and idle periods.
3.Alkaline Cleaners-Cleaning processes can leave metal surfaces exposed. Adding M-370 helps provide protection during and after cleaning.
4.Detergent Formulations-Industrial detergents used on metal equipment can include M-370 to help reduce corrosion risk.
5.Primer Coatings-It can be used in primer coatings where additional corrosion resistance is needed before applying finishing layers.
6.Manufacturing Fluids-Used in different production stages, these fluids benefit from built-in corrosion protection.
7.Rinse-Water Systems-In compatible systems, M-370 can help provide short-term protection after washing processes.
Applications Across UAE and GCC
1. Dubai-Manufacturers in Dubai can use M-370 in fluids, cleaners, lubricants, and coatings used in industrial operations.
2. Abu Dhabi-Suitable for oil and gas, fabrication, and maintenance sectors where water-based systems are widely used.
3. Sharjah-Useful for chemical formulators and metalworking industries producing water-based products.
4. Ajman-Applicable in cleaning, cooling, and lubrication systems used in small and medium industries.
5. Fujairah-Supports corrosion control in coastal environments where humidity and salt exposure are higher.
6. Ras Al Khaimah-Can be used in fabrication and manufacturing processes involving water-based fluids.
7. Umm Al Quwain-Suitable for workshops and maintenance operations handling metal components.
8. Saudi Arabia-Supplied across major industrial cities for use in petrochemical, fabrication, and maintenance sectors.
9. Qatar-Used in industrial cleaning, cooling, and lubrication systems.
10. Oman-Applicable in marine, industrial, and fabrication environments.
11. Kuwait-Suitable for refineries, maintenance contractors, and manufacturing units.
12. Bahrain-Used in industrial cleaning, coating, and fluid formulations.
Technical Specifications
| Specification | Product Details |
|---|---|
| Product Name | M-370 Water-Based Additive |
| Product Type | Multimetal corrosion-preventive additive |
| Product Base | Water-based |
| Technology | Vapor Corrosion Inhibitor technology |
| Primary Function | Corrosion protection in aqueous industrial formulations |
| Main Applications | Metalworking fluids, lubricants, cleaners and coatings |
| Listed Uses | Coolants, primer coatings and alkaline cleaners or detergents |
| Recommended Usage | 1%–10% |
| Standard Packaging | 5-gallon containers |
| Drum Packaging | 55-gallon drums |
| Metric Packaging | Approximately 19-litre containers and 208-litre drums |
| Large-Volume Supply | Liquid totes and bulk |
| Supplier | Alvina |
| Supply Region | UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain |
The official product listing confirms that M-370 is a multimetal additive for water-based metalworking fluids, lubricants, cleaners, and coatings. It also lists coolants, primer coatings, and alkaline cleaners or detergents as primary applications.
Certifications, Standards and Compliance
The standards below are relevant references for evaluating corrosion inhibitors, coatings, and water-based industrial formulations. Product-specific certificates should be confirmed through the latest manufacturer documents.
- ASTM D1654 – Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM B117 – Operating Salt Spray Fog Apparatus
- REACH Regulation – European Chemicals Agency
- GHS – Globally Harmonized System of Classification and Labelling of Chemicals
Why Choose Alvina for M-370 Additive?
Choosing the right supplier is important for consistent product availability and support. Alvina supplies M-370 Water-Based Additive to manufacturers, formulators, and industrial users across the region.
Reasons to choose Alvina:
- Supply across all UAE emirates
- Coverage across GCC countries
- Availability in different packaging sizes
- Support with technical documentation
- Reliable delivery for repeat orders
Alvina serves customers in Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Ras Al Khaimah, and Umm Al Quwain, as well as Saudi Arabia, Qatar, Oman, Kuwait, and Bahrain.
Frequently Asked Questions
1. Is it suitable for metalworking fluids?
Yes, it can be used in compatible water-based metalworking fluids.
2. Can it be used in coolants?
Yes, it is suitable for coolant formulations.
3. Can it be used in lubricants?
Yes, it is suitable for water-based lubricants.
4. Does it use VCI technology?
Yes, it uses Vapor Corrosion Inhibitor technology.
5. What is the recommended dosage?
Typically between 1% and 10%.
6. What packaging is available?
Available in pails, drums, totes, and bulk.
7. Where is it supplied?
Across UAE and GCC countries through Alvina.
Conclusion
M-370 Water-Based Additive offers a practical solution for adding corrosion protection to water-based industrial products.
It can be used in metalworking fluids, coolants, lubricants, cleaners, and coatings. Its VCI technology helps protect metal surfaces during processing and use. With a flexible dosage range and multiple packaging options, it can be adapted to different production needs. Alvina supplies M-370 across the UAE and GCC, supporting manufacturers and industrial users with reliable availability and regional coverage.
Woman fashion dress
Price : $387But I must explain to you how all this mistaken idedenounc pleasure and praisi pain was born and I will give you a complete accosystem, and expound the actu teachings of the great explore tmaster-builder of human happiness. No one rejects, dislikes, or avoids.